Brinkmann 2600 Series Bedienungsanleitung

OFFHIGHLOWOFFHIGHLOWOFFHIGHLOWOFFHIGHLOWMAXIMUM SIDE BURNER LOAD = 15 lbs.1. Read and follow all warnings and instructions in owner’s manual before li

LIGHTING INSTRUCTIONS:Follow the instructions exactly.1. OPEN THE GRILL LID before attempting to light a burner so that fumes do not accumulate inside

LIGHTING THE SIDE BURNER:1. Open lid to the side burner before lighting.2. Turn on the side burner by pressing in and rotating thecontrol knob to the

11OPERATING THE GRILL:Never use Charcoal or Lighter Fluid inside your Gas Grill. Read and follow all warnings andinstructions contained in the precedi

ROTISSERIE COOKING:• Your grill was pre-drilled from factory to include mounting holes for a Brinkmann rotisserie (soldseparately). Do not use a rotis

TRANSPORTING AND STORAGE:• Never move a grill when it is hot or when objects are on the cooking surfaces.• Make sure that cylinder valve is shut off.

CLEANING AND MAINTENANCE:• For safe grilling and peak performance of your grill, perform these checks at least twice per year orafter extended periods

TROUBLE SHOOTING:Problem: Possible Causes:• Burner will not light1. Check LP cylinder fuel level.2. Bad electrode spark.Check to see if the grill will

16• To protect your grill from excessive rust, the unit must be kept clean and covered at all times when not inuse. A grill cover may be ordered direc

ASSEMBLY INSTRUCTIONSREAD ALL SAFETY WARNINGS & ASSEMBLY INSTRUCTIONS CAREFULLYBEFORE ASSEMBLING OR OPERATING YOUR GRILL.WE RECOMMEND TWO PEOPLE W

(Proof of purchase will be required.)Inspect contents of the box to ensure all parts are included and undamaged.1FOR MISSING PARTS, PLEASE CALL CUSTOM

WE WANT YOU TO ASSEMBLE AND USE YOUR GRILL AS SAFELY AS POSSIBLE.THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS TO ATTRACT YOURATTENTION TO POSSIBLE HAZAR

198 M6 X 12mm bolts8 M6 X 20mm bolts14 M6 X 60mm bolts1 AA/1.5V Alkaline batteryPARTS CARD CONTENTSMake sure you have all items listed under PARTS LIS

Choose a good, cleared assemblyarea and get a friend to help you putyour grill together. Lay cardboarddown to protect grill finish andassembly area.St

Note: With the help of a friend, turnthe cart over, try to minimizethe stress to the side panels.Step 3Attach locking casters to the bottomof the cart

22Step 5Place tank tray assembly over ventholes in bottom cart panel andsecure using four M6 X 12mmbolts. Tank tray should slide in andout of cart fre

23Step 7Insert right side door, placing lowerpivot into the pivot hole on bottomcart panel, then align door with cartframe. Depress spring pin located

Note: When performing Step 9, Lift grill body from front andrear panels to avoid injury tohands and fingers.Step 9With the help of a friend, place gri

25Step 10Attach side burner assembly to grillbody assembly by inserting fourM6 X 20mm bolts through theholes in the side burner assemblyand into holes

Step 13Attach side table/ice bucketassembly to grill body assembly byinserting four M6 X 20mm boltsthrough the holes in the sidetable/ice bucket assem

Step 15Insert grill bottom into opening onbackside of grill. Make sure to slidetray onto tracks as illustrated.Step 16Slide grease tray into grease tr

28Step 19Place the porcelain coated heatshields on lower level of grill bodyassembly directly above burners.Step 20Place porcelain cast iron cookinggr

2WARNING• Never use natural gas in a unit designed for liquid propane gas.• Never use charcoal briquets or lighter fluid in a gas grill.• Leak test al

PROFESSIONAL SHISH-KABOB SKEWERSThese heavy-duty, 18" shish-kabob skewers are extra-long for fabulousrestaurant style kabobs. Made of rust resist

ACCESSORIESLOOK FOR THESE AND OTHER BRINKMANN ACCESSORIES AT YOUR LOCAL RETAILERWHERE SMOKERS ARE SOLD, OR ORDER DIRECT BY CALLING1-800-468-5252.THE U

140-2601-18/02, 10/03, 10/05WARRANTY©2002 The Brinkmann CorporationDallas, Texas 75244 U.S.A www.brinkmann.netThe Brinkmann Corporation warrants t

CYLINDER SPECIFICATIONS:When purchasing or exchanging a cylinder for your gas grill, it must be constructed and marked inaccordance with the specifica

4The cylinder must also be equipped with:• A shut-off valve terminating in a Type 1 gas cylinder valve outlet.• A Type 1 valve that prevents gas flow

WARNINGFILLING THE LP GAS CYLINDER:• Allow only qualified LP gas dealers to properly fill or repair your LP gas cylinder.• New tanks should be purged

6WARNING• Never use your grill without leak testing all gas connections and hoses. See the section on"Leak Testing" in this manual for prope

LEAK TESTING:To prevent fire or explosion hazard:• DO NOT smoke or permit ignition sources in the area while conducting a leak test.• Perform test OUT

WARNING86. Check each place listed (A -K) for growing bubbles which indicates a leak.7. Turn OFF gas supply at cylinder valve.8. Turn on control knobs